8 Colors To Choose From

How To Apply Decal

1. Clean area where decal will be applied thoroughly with rubbing alcohol (the higher the percentage, the better).
If area is dirty, just wash the area with water, then clean area with alcohol, and let dry.

2. Carefully, peel backing paper off of decal.
The design/decal should remain on the clear transfer tape (which I made it easier for you to peel).

3. Place decal where you want it to go, then use a squeegee, an old credit or gift card, carefully rub decal to get a good seal to your surface.
Work your way out from the center to the edges, ESPECIALLY if there are sharp points.

4. SLOWLY, peel away the transfer tape at an angle. Go slow and make sure none of the decal remains on the transfer tape.
If it does, repeat step 3.

5. If necessary, pop any air bubbles with a stick pin & gently press with finger to remove air.

*** DECALS IS NOT INTENDED FOR WALLS***